Command Line Interface Guide

Command Groups 143
Virtual Router Redundancy
tunnel destination Specifies the destination transport address of
the tunnel.
IC
tunnel mode ipv6ip Specifies the mode of the tunnel. IC
tunnel source Specifies the source transport address of the
tunnel, either explicitly or by reference to an
interface.
IC
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
Command Description Mode
a
ip vrrp Enables the administrative mode of Virtual
Router Redundancy Protocol (VRRP) for the
router.
GC
vrrp accept-mode Enables the VRRP Master to accept ping
packets sent to one of the virtual router’s IP
addresses.
IC
vrrp authentication Sets the authentication details value for the
virtual router configured on a specified
interface.
IC
vrrp description Assigns a description to the VRRP group. IC
vrrp ip Sets the virtual router IP address value for an
interface.
IC
vrrp mode Enables the virtual router configured on an
interface. Enabling the status field starts a
virtual router.
IC
vrrp preempt Sets the preemption mode value for the virtual
router configured on a specified interface.
IC
vrrp priority Sets the priority value for the virtual router
configured on a specified interface.
IC
vrrp timers advertise Sets the frequency, in seconds, that an interface
on the specified virtual router sends a virtual
router advertisement.
IC
Command Description Mode
a
2CSPC4.XModular-SWUM201.book Page 143 Monday, October 3, 2011 2:21 PM