Command Line Interface Guide

Command Groups 141
Router Discovery Protocol
Routing Information Protocol
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
ip irdp Enables Router Discovery on an interface. IC
ip irdp address Configures the address that the interface uses
to send the router discovery advertisements.
IC
ip irdp holdtime Configures the value, in seconds, of the
holdtime field of the router advertisement sent
from this interface.
IC
ip irdp maxadvertinterval Configures the maximum time, in seconds,
allowed between sending router advertisements
from the interface.
IC
ip irdp minadvertinterval Configures the minimum time, in seconds,
allowed between sending router advertisements
from the interface.
IC
ip irdp multicast Sends router advertisements as IP multicast
packets.
IC
ip irdp preference Configures the preference of the address as a
default router address relative to other router
addresses on the same subnet.
IC
show ip irdp Displays the router discovery information for all
interfaces, or for a specified interface.
PE
Command Description Mode
a
auto-summary Enables the RIP auto-summarization mode. RIP
default-information
originate
Controls the advertisement of default routes. RIP
default-metric Sets a default for the metric of distributed
routes.
RIP
distance rip Sets the route preference value of RIP in the
router.
RIP
2CSPC4.XModular-SWUM201.book Page 141 Monday, October 3, 2011 2:21 PM