Command Line Interface Guide

138 Command Groups
area range Creates an area range for a specified NSSA. ROSV3
area stub Creates a stub area for the specified area ID. ROSV3
area stub no-summary Disables the import of Summary LSAs for the
stub area identified by
areaid.
ROSV3
area virtual-link Creates the OSPF virtual interface for the
specified
areaid and neighbor .
ROSV3
area virtual-link dead-
interval
Configures the dead interval for the OSPF virtual
interface on the virtual interface identified by
areaid and neighbor .
ROSV3
area virtual-link hello-
interval
Configures the hello interval for the OSPF virtual
interface on the virtual interface identified by
areaid and neighbor .
ROSV3
area virtual-link
retransmit-interval
Configures the retransmit interval for the OSPF
virtual interface on the virtual interface identified
by
areaid and neighbor .
ROSV3
area virtual-link
transmit-delay
Configures the transmit delay for the OSPF
virtual interface on the virtual interface identified
by
areaid and neighbor .
ROSV3
default-information
originate
Controls the advertisement of default routes. ROSV3
default-metric Sets a default for the metric of distributed routes. ROSV3
distance ospf Sets the route preference value of OSPF in the
router.
ROSV3
enable Resets the default administrative mode of OSPF
in the router (active).
ROSV3
exit-overflow-interval Configures the exit overflow interval for OSPF. ROSV3
external-lsdb-limit Configures the external LSDB limit for OSPF. ROSV3
ipv6 ospf Enables OSPF on a router interface or loopback
interface.
IC
ipv6 ospf area Sets the OSPF area to which the specified router
interface belongs.
IC
ipv6 ospf cost Configures the cost on an OSPF interface. IC
Command Description Mode
a
2CSPC4.XModular-SWUM201.book Page 138 Monday, October 3, 2011 2:21 PM