Command Line Interface Guide

Command Groups 137
OSPFv3
show ip ospf interface
stats
Displays the statistics for a specific interface. PE
show ip ospf neighbor Displays information about OSPF neighbors. PE
show ip ospf range Displays information about the area ranges for
the specified area-id.
PE
show ip ospf statistics Displays information about recent Shortest Path
First (SPF) calculations.
PE
show ip ospf stub table Displays the OSPF stub table. PE
show ip ospf virtual-link Displays the OSPF Virtual Interface information
for a specific area and neighbor.
PE
show ip ospf virtual-link
brief
Displays the OSPF Virtual Interface information
for all areas in the system.
PE
timers spf Configures the SPF delay and hold time. ROSPF
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
Command Description Mode
a
area default-cost Configures the monetary default cost for the stub
area.
ROSV3
area nssa Configures the specified areaid to function as an
NSSA.
ROSV3
area nssa default-info-
originate
Configures the metric value and type for the
default route advertised into the NSSA.
ROSV3
area nssa no-redistribute Configures the NSSA ABR so that learned
external routes will not be redistributed to the
NSSA.
ROSV3
area nssa no-summary Configures the NSSA so that summary LSAs are
not advertised into the NSSA.
ROSV3
area nssa translator-role Configures the translator role of the NSSA. ROSV3
area nssa translator-stab-
intv
Configures the translator stability interval of the
NSSA.
ROSV3
Command Description Mode
a
2CSPC4.XModular-SWUM201.book Page 137 Monday, October 3, 2011 2:21 PM