Command Line Interface Guide

134 Command Groups
area stub Creates a stub area for the specified area ID. ROSPF
area stub no-summary Prevents Summary LSAs from being advertised
into the NSSA.
ROSPF
area virtual-link Creates the OSPF virtual interface for the
specified area-id and neighbor router.
ROSPF
area virtual-link
authentication
Configures the authentication type and key for
the OSPF virtual interface identified by the area
ID and neighbor ID.
ROSPF
area virtual-link dead-
interval
Configures the dead interval for the OSPF virtual
interface on the virtual interface identified by
area-id and neighbor router.
ROSPF
area virtual-link hello-
interval
Configures the hello interval for the OSPF virtual
interface on the virtual interface identified by the
area ID and neighbor ID.
ROSPF
area virtual-link
retransmit-interval
Configures the retransmit interval for the OSPF
virtual interface on the virtual interface identified
by the area ID and neighbor ID.
ROSPF
area virtual-link
transmit-delay
Configures the transmit delay for the OSPF
virtual interface on the virtual interface identified
by the area ID and neighbor ID.
ROSPF
auto-cost Allows user to change the reference bandwidth
used in computing link cost.
ROSPF
bandwidth Allows user to change the bandwidth used in
computing link cost.
IC
capability opaque Enables Opaque Capability on the router. RC
clear ip ospf Resets specific OSPF states. PE
compatible rfc1583 Enables OSPF 1583 compatibility. ROSPF
default-information
originate
Controls the advertisement of default routes. ROSPF
default-metric Sets a default for the metric of distributed routes. ROSPF
distance ospf Sets the route preference value of OSPF in the
router.
ROSPF
Command Description Mode
a
2CSPC4.XModular-SWUM201.book Page 134 Monday, October 3, 2011 2:21 PM