Command Line Interface Guide

130 Command Groups
show ipv6 brief Displays the IPv6 status of forwarding mode
and IPv6 unicast routing mode.
PE
show ipv6 interface Shows the usability status of IPv6 interfaces. PE
show ipv6 mld groups Displays information about multicast groups
that MLD reported.
PE
show ipv6 mld interface Displays MLD related information for an
interface.
PE
show ipv6 mld-proxy Displays a summary of the host interface
status parameters.
PE
show ipv6 mld-proxy
groups
Displays information about multicast groups
that the MLD Proxy reported.
PE
show ipv6 mld-proxy
groups detail
Displays information about multicast groups
that MLD Proxy reported.
PE
show ipv6 mld-proxy
interface
Displays a detailed list of the host interface
status parameters.
PE
show ipv6 mld traffic Displays MLD statistical information for the
router.
PE
show ipv6 neighbors Displays information about IPv6 neighbors. PE
show ipv6 route Displays the IPv6 routing table. PE
show ipv6 route
preference
Shows the preference value associated with
the type of route.
PE
show ipv6 route summary Displays a summary of the routing table. PE
show ipv6 traffic Shows traffic and statistics for IPv6 and
ICMPv6.
UE
show ipv6 vlan Displays IPv6 VLAN routing interface
addresses.
PE
traceroute ipv6 Discovers the routes that packets actually
take when traveling to their destination
through the network on a hop-by-hop basis.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
Command Description Mode
a
2CSPC4.XModular-SWUM201.book Page 130 Monday, October 3, 2011 2:21 PM