Command Line Interface Guide

126 Command Groups
IPv6 Multicast
show ip interface Displays all pertinent information about the IP
interface.
PE
show ip protocols Displays the parameters and current state of the
active routing protocols.
PE
show ip route Displays the routing table. PE
show ip route preferences Displays detailed information about the route
preferences.
PE
show ip route summary Shows the number of all routes, including best
and non-best routes.
PE
show ip traffic Displays IP statistical information. UE or
PE
show ip vlan Displays the VLAN routing information for all
VLANs with routing enabled.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
Command Description Mode
a
ipv6 pimsm (Global
Config)
Administratively enables PIMSM for IPv6
multicast routing.
GC
ipv6 pimsm (VLAN
Interface Config)
Administratively enables PIM-SM multicast
routing mode on a particular IPv6 router
interface.
IC
ipv6 pimsm bsr-border Prevents bootstrap router (BSR) messages from
being sent or received through an interface.
IC
ipv6 pimsm bsr-candidate Configures the router to announce its
candidacy as a bootstrap router (BSR).
GC
ipv6 pimsm dr-priority Sets the priority value for which a router is
elected as the designated router (DR).
IC
ipv6 pimsm hello-interval Administratively configures the PIM-SM Hello
Interval for the specified interface.
IC
ipv6 pimsm join-prune-
interval
Administratively configures the interface
join/prune interval for the PIM-SM router,
IC
Command Description Mode
a
2CSPC4.XModular-SWUM201.book Page 126 Monday, October 3, 2011 2:21 PM