Command Line Interface Guide

Command Groups 117
Priority Flow Control Commands
show fip-snooping enode Displays information about the interfaces
connected to ENodes
UE,
PE
show fip-snooping fcf Displays information about the interfaces
connected to FCFs.
UE,
PE
show fip-snooping sessions Displays information about the active FIP
snooping sessions.
UE,
PE
show fip-snooping statistics Displays the statistics of the FIP packets
snooped in the VLAN or on an interface.
UE,
PE
show fip-snooping vlan Displays the FCoE VLANs information and,
additionally, the FIP snooping port status when
optional argument is specified.
UE,
PE
clear fip-snooping statistics Clears the FIP Snooping statistics in the
supplied VLAN or on a supplied interface.
UE,
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
priority-flow-control mode Enables Priority-Flow-Control (PFC) on an
interface.
DCB
priority-flow-control
priority
Enables the priority group for lossless behavior
(PFC enabled).
DCB
clear priority-flow-control
statistics
Clears all or interface Priority-Flow-Control
statistics.
PE
show interfaces priority-
flow-control
Displays the global or interface priority flow
control status and statistics.
PE
Command Description Mode
a
2CSPC4.XModular-SWUM201.book Page 117 Monday, October 3, 2011 2:21 PM