Command Line Interface Guide

116 Command Groups
Data Center Technology Commands
Data Center Bridging Commands
FIP Snooping Commands
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types.
datacenter-bridging Enters the Data Center Bridging mode. IC
lldp dcbx version Enables the switch to support a specific version
of the Data Center Bridging Capability
Exchange (DCBX) protocol or to detect the
peer version and match it.
GC
lldp tlv-select dcbxp Sends specific DCBX TLVs if LLDP is enabled
to transmit on the given interface. If no
parameter is given, all DCBX TLVs are enabled
for transmission.
IC,
GC
lldp dcbx port-role Configures the port role to manual, auto-
upstream, auto-downstream and configuration
source.
IC
show lldp tlv-select Displays the per interface TLV configuration. PE
show lldp dcbx Displays the per interface DCBX configuration
and status.
PE
Command Description Mode
a
feature fip-snooping Globally enables Fibre Channel over Ethernet
Initialization Protocol (FIP) snooping on the
switch.
GC
fip-snooping enable Enables snooping of FIP packets on the
configured VLANs.
VLAN
fip-snooping fc-map Configures the FP-MAP value on a VLAN. VLAN
fip-snooping port-mode Configure the interface that is connected
toward FCF.
IC
show fip-snooping Displays information about the global FIP
snooping configuration and status.
UE,
PE
2CSPC4.XModular-SWUM201.book Page 116 Monday, October 3, 2011 2:21 PM