Command Line Interface Guide

Command Groups 115
show dot1x clients Displays detailed information about the users
who have successfully authenticated on the
system or on a specified port.
PE
show dot1x interface Shows the status of MAC Authentication
Bypass.
PE
show dot1x statistics Displays 802.1X statistics for the specified
interface.
PE
show dot1x users Displays active 802.1X authenticated users for
the switch.
PE
clear dot1x authentication-
history
Clears the authentication history table captured
during successful and unsuccessful
authentication.
PE
dot1x guest-vlan Sets the guest VLAN on a port. IC
dot1x unauth-vlan Specifies the unauthenticated VLAN on a port. IC
dot1x guest-vlan Defines a guest VLAN. IC
show dot1x advanced Displays 802.1X advanced features for the
switch or specified interface.
PE
radius-server attribute 4 Sets the network access server (NAS) IP address
for the RADIUS server.
GC
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
Command Description Mode
a
2CSPC4.XModular-SWUM201.book Page 115 Monday, October 3, 2011 2:21 PM