Reference Guide

712 QoS Commands
Syntax
show policy-map interface {gigabithethernet unit/slot/port|
tengigabitethernet unit/slot/port port-channel
port-channel number }
{in|out}
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays the statistics information for port te1/0/1.
console#show policy-map interface te1/0/1 in
Interface..................................... te1/0/1
Operational Status............................ Down
Policy Name................................... DELL
Interface Summary:
Class Name.................................... PowerConnect
In Offered Packets............................ 1003
Parameter Description
port-channel
number
A valid port-channel identifier.
in Show inbound service policies. The offered value indicates the
number of packets received by the classifier.
out Show outbound service policies. The discarded value indicates
the number of packets discarded by the policy.
2CSPC4.XModular-SWUM204.book Page 712 Friday, March 15, 2013 9:24 AM