Reference Guide

QoS Commands 685
• ipmask — Specifies a valid IP address bit mask. Note that although this IP
address bit mask is similar to a subnet mask, it does not need to be
contiguous.
Default Configuration
This command has no default configuration.
Command Mode
Class-Map Configuration mode
User Guidelines
Only one srcip matching criteria can be specified. To remove the matching
criteria, delete the class map.
Example
The following example displays adding a match condition for the specified IP
address and address bit mask.
console(config-classmap)#match srcip 10.240.1.1
10.240.0.0
match srcip6
The match srcip6 command adds to the specified class definition a match
condition based on the source IPv6 address of a packet.
Syntax
match srcip6 source-ipv6-prefix/prefix-length
• source-ipv6-prefix —IPv6 prefix in IPv6 global address format.
•
prefix-length —IPv6 prefix length value.
Default Configuration
There is no default configuration for this command.
Command Mode
Ipv6-Class-Map Configuration mode.
2CSPC4.XModular-SWUM204.book Page 685 Friday, March 15, 2013 9:24 AM