Reference Guide

AAA Commands 251
Syntax
aaa authorization {commands|exec|network}{ default | list-name } method1
[method2]
no aaa authorization {commands|exec|network} {
default | list-name }
Parameter Description
Default Configuration
Authorization is not enabled by default. Only TACACS is supported for
authorization. Setting a none method for authorization authorizes all
commands.
Parameter Description
Authorization specifier:
exec Provides EXEC authorization. All methods are supported.
commands Performs authorization of user commands. Only none and
tacacs methods are supported.
network Performs RADIUS authorization of commands. Only the
default list is supported.
default The default list of methods for authorization services
(dfltCmdAuthList and dfltExecAuthList). Only the radius
method is supported.
list-name Character string used to name the list of accounting methods.
The list name can consist of any alphanumeric character up to
15 characters in length. Use quotes around the list name if
embedded blanks are contained in the list name.
method
(
method1/method2 .
..)
The following authorization methods are supported:
• local – Perform local authorization (do not perform
authorization<Variable>—all commands are authorized).
• none – Do not perform authorization. All commands are
authorized.
• radius – Request authorization from the configured RADIUS
servers.
• tacacs – Request authorization from the configured
TACACS+ servers.
2CSPC4.XModular-SWUM204.book Page 251 Friday, March 15, 2013 9:24 AM