Reference Guide

Command Groups 162
Syslog
show ip ssh Displays the SSH server configuration. PE
user-key Specifies which SSH public key is manually
configured and enters the SSH public key-string
configuration command.
SP
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
Command Description Mode
a
clear logging Clears messages from the internal logging
buffer.
PE
clear logging file Clears messages from the logging file. PE
description (Logging) Describes the syslog server. L
level Specifies the importance level of syslog
messages.
L
logging cli-command Enable CLI command logging. GC
logging Logs messages to a syslog server. GC
logging audit Enables switch auditing. GC
logging buffered Limits syslog messages displayed from an
internal buffer based on severity.
GC
logging console Limits messages logged to the console based on
severity.
GC
logging facility Configures the facility to be used in log
messages.
GC
logging file Limits syslog messages sent to the logging file
based on severity.
GC
logging on Controls error messages logging. GC
logging snmp Enables SNMP Set command logging. GC
logging web-session Enables web session logging. GC
port Specifies the port number of syslog messages. L
show logging Displays the state of logging and the syslog
messages stored in the internal buffer.
PE
Command Description Mode
a
2CSPC4.XModular-SWUM204.book Page 162 Friday, March 15, 2013 9:24 AM