Release Notes

Fabric OS v7.2.1e Release Notes v1.0 Page 59 of 82
Closed with Code Change in Fabric OS v7.2.1a
This sections lists the defects with Critical, High, and Medium Technical Severity closed with a code change as
of March 7th, 2014, in Fabric OS v7.2.1a.
Defect ID:
DEFECT000461189
Technical Severity:
High
Probability:
Low
Product:
FOS
Technology:
Management
Reported In Release:
FOS7.2.0
Technology Area:
Web Tools
Closed In Release(s):
FOS7.2.1a(Fixed)
Symptom:
Unable to launch web tools using Google chrome browser and IE11 with Java update 45 or 51
Condition:
This happens when using the latest Java update revision 45 or 51.
Workaround:
Use another browser or older java update.
Defect ID:
DEFECT000466071
Technical Severity:
Medium
Probability:
Low
Product:
FOS
Technology:
Monitoring/RAS
Reported In Release:
FOS7.2.0
Technology Area:
Logging
Closed In Release(s):
FOS7.2.1a(Fixed)
Symptom:
Observed verify error from name server daemon on an idle switch: "VERIFY - Failed expression:
0, file = ns.c, line = 5834...". Too many verifies can trigger a switch panic.
Condition:
When device sent PLOGI with invalid SID/DID, such as SID of 0.
Workaround:
Disable the port connecting to the device sending invalid SID.
Defect ID:
DEFECT000474833
Technical Severity:
Medium
Probability:
Low
Product:
FOS
Technology:
Distance
Reported In Release:
FOS7.0.0
Technology Area:
FCIP Fastwrite
Closed In Release(s):
FOS7.2.1a(Fixed)
Symptom:
Job failures after check condition from tape device (the next I/O is incorrectly responded to with a
deferred error check condition status).
Condition:
If a tape device is accessed via a non-OSTP (Open Systems Tape Pipelining) tunnel and it returns a
check condition to an I/O, FCIP FW processing would incorrectly generate a second check condition
status to the next I/O for that tape device.
Workaround:
Enable OSTP on the FCIP FW enabled tunnels if there are also Tape devices accessed via the
tunnel.
Defect ID:
DEFECT000475036
Technical Severity:
Medium
Probability:
Low
Product:
FOS
Technology:
Management
Reported In Release:
FOS7.2.0
Technology Area:
CLI
Closed In Release(s):
FOS7.2.1a(Fixed)
Symptom:
CLI command "apploginhistory --show" indicates webtools connection after webtools is closed
Condition:
Close webtools and run CLI command "apploginhistory --show"
Workaround:
Use the normal exit to exit to close webtools session.
i.e. On Webtools select Manage --> Exit
Do not click "X" to close webtools session.