Release Notes

Closed defects without code change in Fabric OS v7.2.0
Fabric OS v7.2.0a Release Notes v1.0 Page 92 of 93
Defect ID:
DEFECT000439119
Technical Severity:
Medium
Summary:
Misleading (DPort + DWDM) instructions to "enable the port" to remove DWDM upon proper
firmwaredownload failure.
Symptom:
Firmwaredownload is properly blocked but the instructions of "Portcfgdport --disable" command
does not rectify the situation.
Reason Code:
Already Fixed in Release
Probability:
Medium
Feature:
FIRMWARE DOWNLOAD
Function:
FirmwareInstall
Reported In Release:
FOS7.0.1
Defect ID:
DEFECT000439333
Technical Severity:
Medium
Summary:
A CEC POR causes IFCCs on other CECs
Symptom:
A CEC POR causes IFCCs on CHPIDs attached from another CEC.
Reason Code:
Not Reproducible
Probability:
High
Feature:
FICON
Function:
MS-FICON
Reported In Release:
FOS7.1.0
Defect ID:
DEFECT000445573
Technical Severity:
Medium
Summary:
DCX4S chassis has Fabric Watch daemon stopped, results in BNA displaying bubble icon forever.
Symptom:
BNA will persistently display the bubble icon.
Reason Code:
Not Reproducible
Probability:
Medium
Feature:
8G Platform Services
Function:
Other
Reported In Release:
FOS7.1.0
Defect ID:
DEFECT000446956
Technical Severity:
Medium
Summary:
Port status is marginal with no reason
Symptom:
Port status is marginal without reason is seen when connected to DWDM configured for 300 Km of
distance. Problem is not seen when distance is configured to 100 Km
Reason Code:
Will Not Fix
Probability:
Medium
Feature:
FABRIC WATCH
Function:
CLI
Reported In Release:
FOS7.1.0
Defect ID:
DEFECT000447192
Technical Severity:
Medium
Summary:
D-Port test between AG and the HBA is stuck and is in "IN PROGRESS" status.
Symptom:
D-Port test between AG and the HBA is stuck in the "IN PROGRESS" state. It passed the Electrical
Loopback but it never started the Optical and the rest of test.
Reason Code:
Not Applicable
Probability:
Low
Feature:
Access Gateway Services
Function:
Other
Reported In Release:
FOS7.1.0
Defect ID:
DEFECT000448789
Technical Severity:
Medium
Summary:
CHPIDs went to invalid attach state after a power cycle of DCX
Symptom:
When 2Gb channels were inserted into 16Gb sfps and powercycled, non-2Gb channels which were
plugged in may transition into an Invalid Attachment state.
Reason Code:
Not Reproducible
Probability:
Medium
Feature:
16G ASIC Driver
Function:
16Bbps/10Gbps Port
Reported In Release:
FOS7.1.0