Release Notes

Closed defects without code change in Fabric OS v7.2.0
Fabric OS v7.2.0a Release Notes v1.0 Page 91 of 93
Defect ID:
DEFECT000424424
Technical Severity:
Medium
Summary:
Two devices over Routed VE/VEX fabric cannot estabish logical paths
Symptom:
Observed that the translate domain over VE/VEX ports is not in fabricshow and some hosts cannot
communicates to targets.
Reason Code:
Not Reproducible
Probability:
Low
Feature:
FOS Software
Function:
Fabric Services
Reported In Release:
FOS7.0.0
Service Request ID:
1096157
Defect ID:
DEFECT000425749
Technical Severity:
Medium
Summary:
secd may panic at times of high CPU usage
Symptom:
secd may panic during times of high CPU usage such as firmwaredownload or securtiy scans.
Reason Code:
Not Reproducible
Probability:
Low
Feature:
FOS Security
Function:
ACL
Reported In Release:
FOS7.1.0
Service Request ID:
,1163022
Defect ID:
DEFECT000428368
Technical Severity:
Medium
Summary:
turboramtest output is different depending on switch platform
Symptom:
Inconsistent output from turboramtest on BR8510 and BR6510
Reason Code:
Already Fixed in Release
Probability:
Low
Feature:
Diagnostics
Function:
Other
Reported In Release:
FOS7.0.2
Service Request ID:
1102971
Defect ID:
DEFECT000429899
Technical Severity:
Medium
Summary:
In VF mode, Fabric Watch is not able to check the status of "State Change" area of LISL by
fwconfigure/portthconfig
Symptom:
State change alarms from Fabric Watch when the LISL toggles exceed specfied thresholds will not be
received.
Reason Code:
Will Not Fix
Probability:
Medium
Feature:
FABRIC WATCH
Function:
PORT FENCING
Reported In Release:
FOS7.1.0
Service Request ID:
1035413
Defect ID:
DEFECT000437482
Technical Severity:
Medium
Summary:
FC16-32 Port Blade may fault with reason code 51 when the DCX4S chassis is powered up.
Symptom:
FC16-32 by fault with reason code 51 when powering up in a DCX4S.
Workaround:
The following methods may help you get around the issue:
a. Reseating the blade.
b. Moving the blade to another slot.
c. Disabling POST
Reason Code:
Already Fixed in Release
Probability:
Medium
Feature:
Diagnostics
Function:
Post Diags
Reported In Release:
FOS7.1.0
Defect ID:
DEFECT000439055
Technical Severity:
Medium
Summary:
FX8-24 Transitions Faulty(51) on a reboot. Incompatible Blade processor FPGA version.
Symptom:
FX8-24 Transitions Faulty(51) on a reboot due to an incompatible Blade processor FPGA version.
BL-1050 messages will be logged.
Reason Code:
Not Reproducible
Probability:
Medium
Feature:
Diagnostics
Function:
Post Diags
Reported In Release:
FOS7.1.0