Release Notes

Closed defects without code change in Fabric OS v7.2.0
Fabric OS v7.2.0a Release Notes v1.0 Page 89 of 93
Defect ID:
DEFECT000437555
Technical Severity:
High
Summary:
Sfpshow CLI does not provide data
Symptom:
Sfpshow CLI will show "Not Available" on some fields, and "polling has not started" as listed below:
Temperature : Not Available
Current : Not Available
Voltage : Not Available
RX Power : Not Available
TX Power : Not Available
Last poll time : Polling has not started
Workaround:
sfpshow -f
Reason Code:
Already Fixed in Release
Probability:
High
Feature:
16G Platform Services
Function:
FOS Kernel Drivers
Reported In Release:
FOS7.1.0
Service Request ID:
,1035679
Defect ID:
DEFECT000441022
Technical Severity:
High
Summary:
6510 getting First failure data capture (FFDC) maximum storage size (4 MB) was reached
Symptom:
"First failure data capture (FFDC) maximum storage size (4 MB) was reached" error will be
repeatedly seen and the switch will fault and reboot.
Reason Code:
Already Fixed in Release
Probability:
High
Feature:
FOS-Infrastructure
Function:
Other
Reported In Release:
FOS7.1.0
Defect ID:
DEFECT000448479
Technical Severity:
High
Summary:
Cannot remove an ipv6 address programmed on the switch.
Symptom:
Unable to delete an ipv6 address programmed on a DCX using the ipaddrset command.
Workaround:
Use the ipaddrset --clear command.
Reason Code:
Not Applicable
Probability:
Medium
Feature:
OS Services
Function:
IP Admin
Reported In Release:
FOS7.1.0
Defect ID:
DEFECT000456236
Technical Severity:
High
Summary:
IO errors when Long distance ISL is changed from 4 Gb to 8 Gb
Symptom:
enc_out errors when Long distance ISL is changed from 4 Gb to 8 Gb
Reason Code:
Already Fixed in Release
Probability:
Low
Feature:
8G ASIC Driver
Function:
Other
Reported In Release:
FOS6.4.2
Service Request ID:
1168959
Defect ID:
DEFECT000460768
Technical Severity:
High
Summary:
Blade fault unnecessarily on rare parity errors.
Symptom:
Customer experienced frequent blade fault upon detecting transient self-correctable ASIC errors
Reason Code:
Already Fixed in Release
Feature:
FOS Software
Function:
ASIC Driver
Reported In Release:
FOS7.1.0
Service Request ID:
1184138