Release Notes

Closed defects with code change in Fabric OS v7.2.0
Fabric OS v7.2.0a Release Notes v1.0 Page 82 of 93
Defect ID:
DEFECT000453432
Technical Severity:
Medium
Summary:
Encryption Admin guide for DPM: Need to advertise that Keys should not be
(Deactivated/Compromised/Destroyed) in the RKM KV without following decommission procedure
Symptom:
Following information will be seen in the Raslog for updating the DEKSon BES.
=================================================================
2013/02/26-23:24:27:328406, [KAC-1013], 2339655/2301768, SLOT 6 | FID 128, WARNING,
ED_DCX_B, Putting the Actual DEK to the KV 10.77.77.40 failed. Actual Key:
946f8316...1c42477b. Error code=20035,
string=R_KM_ERROR_INCORRECT_KEY_STATE_TRANSITION, rsa.c, line: 1602, comp:kacd,
ltime:2013/02/26-23:24:27:328382
Risk of Fix:
Low
Feature:
Data Security
Function:
DOCUMENTATION
Reported In Release:
FOS7.0.1
Service Request ID:
53219848
Defect ID:
DEFECT000453737
Technical Severity:
Medium
Summary:
DCX chassis encountered a kernal panic (nsd0) after traffic started.
Symptom:
DCX chassis may encounter a kernal panic (nsd0) after traffic starts.
Risk of Fix:
Low
Probability:
Medium
Feature:
Mgmt Embedded - SNMP
Function:
Other
Reported In Release:
FOS7.1.0
Defect ID:
DEFECT000454148
Technical Severity:
High
Summary:
FCIP FICON: Attention status is not being sent to channel
Symptom:
Tape mounts are not always completed.
Workaround:
Disable the FOS v7.1.0c new FCIP FICON emulation Idle Status Accept feature. The feature can
be disabled via the following command:
portcfg fciptunnel <slot/>vePort modify --ficon-debug NewFlags
Where NewFlags is a 32 bit hex valud that includes the 0x1000 bit. The 0x1000 bit disables the
new FICON Emulation Idle Status Accept feature that was introduced in FOS v7.1.0.
Risk of Fix:
Low
Probability:
Low
Feature:
FCIP
Function:
FCIP I/O
Reported In Release:
FOS7.1.0
Defect ID:
DEFECT000454150
Technical Severity:
High
Summary:
FCIP FICON Sync Sort job fails sorting 1G random data file
Symptom:
Job receives SIM error and fails
Workaround:
Disable the FOS v7.1.0c new FCIP FICON emulation Idle Status Accept feature. The feature can
be disabled via the following command:
portcfg fciptunnel <slot/>vePort modify --ficon-debug NewFlags
Where "NewFlags" is a hex 32 bit value that includes the 0x1000 bit. The 0x1000 bit disables the
FICON Emulation Idle Status Accept feature that was introduced in FOS v7.1.0.
Risk of Fix:
Low
Probability:
High
Feature:
FCIP
Function:
FCIP I/O
Reported In Release:
FOS7.1.0