Release Notes

Closed defects with code change in Fabric OS v7.2.0
Fabric OS v7.2.0a Release Notes v1.0 Page 78 of 93
Defect ID:
DEFECT000447611
Technical Severity:
High
Summary:
Disable auto tuning for 8G blades in 16G chassis. Only manual tuning will be supported for this
combination.
Symptom:
After enabling auto tuning, FC8-64 blades faulted in a 16G chassis and the blade had to be power
cycled to be recovered.
Workaround:
Disable auto tuning
Risk of Fix:
Medium
Probability:
Medium
Feature:
FOS Software
Function:
ASIC Driver
Reported In Release:
FOS7.0.2
Service Request ID:
1149900
Defect ID:
DEFECT000447848
Technical Severity:
High
Summary:
Network Advisor failed to get VF details for the switch when FMS mode is enabled.
Symptom:
Unable to open VF dialog in Network Advisor for a switch with FMS mode enabled.
Risk of Fix:
Low
Probability:
Low
Feature:
FICON
Function:
Ficud
Reported In Release:
FOS7.1.0
Defect ID:
DEFECT000448174
Technical Severity:
High
Summary:
Director may panic with termination of process fabricd
Symptom:
Director experienced panic after ICL un-plugin/re-plugin or disabling ICL’s master
Workaround:
Need to reboot the standby every time ICL master fails and slave turns to new master
Risk of Fix:
Low
Probability:
Medium
Feature:
FC Services
Function:
Fabric
Reported In Release:
FOS7.1.0
Defect ID:
DEFECT000448241
Technical Severity:
High
Summary:
Identification and notification of marginal/bad CP blade needs to be improved.
Symptom:
During operations like firmwaredownload, FOS failed to identify that a CP blade had hardware issues
and should have been faulted with a critical entry written to the error log noting need for immediate
replacement.
Risk of Fix:
Low
Probability:
Low
Feature:
FIRMWARE DOWNLOAD
Function:
Firmware Download
Reported In Release:
FOS7.1.0
Defect ID:
DEFECT000448364
Technical Severity:
Medium
Summary:
Port Admin table does not get updated within the expected refresh interval
Symptom:
Port admin table may show stale data since it is not getting updated as expected.
Risk of Fix:
Low
Probability:
Medium
Feature:
WebMgmt
Function:
Other
Reported In Release:
FOS7.1.0
Defect ID:
DEFECT000448534
Technical Severity:
High
Summary:
Name server stops responding to CT commands such as GID_FT, GPN_FT, and RPN_ID.
Symptom:
3rd party storage ports stop responding, resulting in I/O stoppage. The device's ports must be
manually reset to force a relogin with the nameserver again.This issue occurs intermittently at
customer setup.
Risk of Fix:
Low
Probability:
Low
Feature:
FOS Software
Function:
Fabric Services
Reported In Release:
FOS7.0.1
Service Request ID:
1104327