Release Notes

Closed defects with code change in Fabric OS v7.2.0
Fabric OS v7.2.0a Release Notes v1.0 Page 59 of 93
Defect ID:
DEFECT000404322
Technical Severity:
Medium
Summary:
Diagnostics do not attain saturation of 3.2G throughput over long distance E-port due to reduced size
frames
Symptom:
Expected throughput of 3.2G for Long Distance E-Port is not obtained during spinfab test using 16G
LWL 10km SFP
Risk of Fix:
Low
Feature:
Diagnostics
Function:
Other
Reported In Release:
FOS7.0.2
Defect ID:
DEFECT000405095
Technical Severity:
Medium
Summary:
thconfig not supporting timebase option none for class SFP with SFPTYPE as 16G,10G,QSFP
Symptom:
When setting timebase option for class SFP, area PWRONHRS, to none, customer gets an error :
"Timebase not supported by this class"
Risk of Fix:
Low
Probability:
High
Feature:
FOS Software
Function:
Fabric Services
Reported In Release:
FOS7.0.1
Service Request ID:
741483,741497
Defect ID:
DEFECT000408673
Technical Severity:
Medium
Summary:
Weblnker crashed during configupload
Symptom:
weblinker process crashed while processing a configupload operation.
Risk of Fix:
Low
Probability:
Medium
Feature:
FOS-Infrastructure
Function:
Config Upload
Reported In Release:
FOS7.0.1
Service Request ID:
747269
Defect ID:
DEFECT000408703
Technical Severity:
Medium
Summary:
Updated default serdes value for FC8-48 and new value is effective after hafailover.
Symptom:
CRC with Good EOF Errors detected on Slot 1 port 2 of DCX-4S with FC8-48 installed in Slot 1
Risk of Fix:
Low
Feature:
8G ASIC Driver
Function:
C2 ASIC driver
Reported In Release:
FOS6.4.2
Service Request ID:
736755
Defect ID:
DEFECT000410381
Technical Severity:
Medium
Summary:
RPC entries need to be removed from IP filter
Symptom:
ipfilter --show continues to display RPC ports
Risk of Fix:
Low
Probability:
High
Feature:
FOS Software
Function:
Management Embedded
Reported In Release:
FOS7.0.0
Service Request ID:
753121,649971,696577
Defect ID:
DEFECT000417149
Technical Severity:
High
Summary:
EPort Recommission of XISL EPorts causes "c3_disc" counters to increment. Traffic however does
not fail.
Symptom:
EPort Recommission of XISL EPorts causes "c3_disc" counters to increment with DLS and Lossless
enabled. Traffic however does not fail.
Workaround:
No workaround is needed currently, given that FICON traffic continues to run without errors.
Risk of Fix:
Medium
Probability:
Medium
Feature:
8G ASIC Driver
Function:
ASIC Driver
Reported In Release:
FOS7.1.0