Release Notes

Open Defects in Fabric OS v7.2.0
Fabric OS v7.2.0a Release Notes v1.0 Page 43 of 93
Defect ID:
DEFECT000459843
Technical Severity:
High
Summary:
All supportsaves have module timeouts and take more than 55 minutes to complete in Port Throttling
case.
Symptom:
All supportsaves have module timeouts and take more than 55 minutes to complete in Port Throttling
case.
Workaround:
Workaround is to use the CLI supportsave -t 2 option.
Feature:
16G Platform Services
Function:
FOS Kernel Drivers
Reported In Release:
FOS7.2.0
Probability:
Medium
Defect ID:
DEFECT000462116
Technical Severity:
High
Summary:
Observed switch panic when standby CP tried to take over after hardware failure.
Symptom:
During a very rare port blade hardware failure, it triggered heart beat loss on active CP followed by
ASSERT in RTE module when standby tried to take over.
Feature:
FOS Software
Function:
Panic / OOM
Service Request ID:
1188077
Reported In Release:
FOS7.0.0
Probability:
Low
Defect ID:
DEFECT000465666
Technical Severity:
High
Summary:
Master log port unit connectivity status change event description does not provide enough information
to proceed
Symptom:
The error message "The overall portstatus of the connectivity unit has changed" is shown for TOP
every 10 minutes
Feature:
Mgmt Embedded - SNMP
Function:
Other
Reported In Release:
FOS7.2.0
Probability:
Medium
Defect ID:
DEFECT000465879
Technical Severity:
High
Summary:
16Gb SFP rules for TXP and SFP Current are violated when a neighbor EPort transitions online.
Symptom:
Invalid reporting of MAPS 16G SFP rules for optice when its neighbor EPort transitions online.
Feature:
Advanced Monitoring Services
Function:
Rules and Policies
Reported In Release:
FOS7.2.0
Probability:
High
Defect ID:
DEFECT000466587
Technical Severity:
High
Summary:
Reboot of core switch may result in EX-Ports stuck in "Switch not ready for EX_Ports" state
Symptom:
EX_Ports may get stuck in "Switch not ready for EX_Ports" status for a period of time when a core
switch in a backbone is rebooted
Workaround:
Disable and enable the E-ports on the core switch.
Feature:
8G FCR
Function:
FCR Port
Reported In Release:
FOS7.2.0
Probability:
Low
Defect ID:
DEFECT000467418
Technical Severity:
High
Summary:
SNMP is returning Same values for 60 second when only one port is polled for real time statistics.
Symptom:
User will see the unexpected plotting in the performance graphs. Since polling is returning a new value
for the port every 60 seconds.
Workaround:
Monitor multiple ports at once.
Feature:
Mgmt Embedded - SNMP
Function:
Other
Reported In Release:
FOS7.2.0
Probability:
Low