Setup Guide

6 of 292 Brocade DCX 8510-8 Backbone QuickStart Guide
53-1002366-01
Brocade DCX 8510-8, nonport side
The following figure shows a sample configuration of the nonport side view of the Brocade DCX 8510-8.
FIGURE 2 Nonport side of the Brocade DCX 8510-8 (sample configuration)
Time and items required for installation
You can set up and install the Brocade DCX 8510-8 in the following ways:
• As a standalone unit on a flat surface.
• In a 19-inch Electronic Industries Association (EIA) cabinet, using the 14U Rack Mount Kit (provided).
1 WWN bezel (logo plate - WWN card behind with serial
number on the card)
3 Blower assembly
2 Power supply
3
1
2