Reference Guide

1076 Fabric OS Command Reference
53-1002921-02
switchShow
2
OPERANDS This command has the following operands:
-slot slot
Displays blade information. You can specify this operand with -portname or
-qsfp.
-portname
Displays the name for each port on the switch. The port name is set by the
portName command.
-qsfp
Displays the output of the switchShow command with a QSFP column added. If a
QSFP is installed on the port, the QSFP number is displayed for the port. This
number corresponds to the physical QSFP number that can be found on the front
of each Core Blade. A double dash (--) indicates that QSFP is not supported on
that blade.
-portcount
Displays the number of ports on the switch. This operand is exclusive.
EXAMPLES To display the port count:
switch:admin> switchshow -portcount
FC ports = 198, GE ports = 12
To display a QoS-capable Core Access Gateway with online AoQ F_Ports and N_Ports:
switch:admin> switchshow
switchName: Spirit_125
switchType: 66.1
switchState: Online
switchMode: Access Gateway Mode
switchWwn: 10:00:00:05:1e:85:95:d0
switchBeacon: OFF
FC Router: OFF
FC Router BB Fabric ID: 1
Area Port Media Speed State Proto
=====================================
0 0 -- N8 No_Module FC
1 1 -- N8 No_Module FC
2 2 -- N8 No_Module FC
3 3 -- N8 No_Module FC
4 4 -- N8 No_Module FC
5 5 -- N8 No_Module FC
6 6 -- N8 No_Module FC
7 7 -- N8 No_Module FC
8 8 -- N8 No_Module FC
9 9 id N8 Online FC F-Port \
10:00:00:05:1e:53:2c:54 0x690105 (AoQ)
10 10 id N8 Online FC F-Port \
10:00:00:05:1e:56:5f:a9 0x690107 (AoQ)
11 11 id N4 Online FC F-Port \
10:00:00:05:1e:56:5f:a8 0x690106 (AoQ)
12 12 -- N8 No_Module FC
13 13 -- N8 No_Module FC
14 14 -- N8 No_Module FC
15 15 -- N8 No_Module FC
16 16 id N8 No_Light FC
17 17 id N8 Online FC F-Port \
1 N Port + 3 NPIV public (AoQ)
18 18 -- N8 No_Module FC