Reference Guide

Command Groups 94
GVRP
ethernet cfm mep enable Enables a MEP at the specified level and
direction.
IC
ethernet cfm mep active Activates a MEP at the specified level and
direction.
IC
ethernet cfm mep archive-
hold-time
Maintains internal information on a missing
MEP.
IC
ethernet cfm mip level Creates a Maintenance Intermediate Point
(MIP) at the specified level.
IC
ping ethernet cfm Generates a loopback message (LBM) from
the configured MEP.
PE
traceroute ethernet cfm Generates a link trace message (LTM) from the
configured MEP.
PE
show ethernet cfm errors Displays the cfm errors. PE
show ethernet cfm domain Displays the configured parameters in a
maintenance domain.
PE
show ethernet cfm
maintenance-points local
Displays the configured local maintenance
points.
PE
show ethernet cfm
maintenance-points remote
Displays the configured remote maintenance
points.
PE
show ethernet cfm statistics Displays the CFM statistics. PE
debug cfm Enables CFM debugging. PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
Command Description Mode
a
clear gvrp statistics Clears all the GVRP statistics information. PE
garp timer Adjusts the GARP application join, leave, and
leaveall GARP timer values.
IC
gvrp enable (global) Enables GVRP globally. GC
gvrp enable (interface) Enables GVRP on an interface. IC
gvrp registration-forbid De-registers all VLANs, and prevents dynamic
VLAN registration on the port.
IC
Command Description Mode
a
2CSPC4.X8100-SWUM102.book Page 94 Friday, March 15, 2013 8:56 AM