Reference Guide

248 AAA Commands
Default Configuration
By default, the switch does not accept VLAN assignments by the RADIUS
server.
Command Mode
Global Configuration mode
User Guidelines
The RADIUS server can place a port in a particular VLAN based on the result
of the authentication. VLAN assignment must be configured on the external
RADIUS server.
Example
The following example enables RADIUS-assigned VLANs.
console(config)#aaa authorization network default
radius
aaa ias-user username
Use the aaa ias-user username command in Global Configuration mode to
configure IAS users and their attributes. Username and password attributes
are supported. The ias-user name is composed of up to 64 alphanumeric
characters. This command also changes the mode to a user config mode. Use
the no form of this command to remove the user from the internal user
database.
Syntax
aaa ias-user username user
no aaa ias-user username user
Parameter Description
This command does not require a parameter description.
Default Configuration
This command has no default configuration.
2CSPC4.X8100-SWUM102.book Page 248 Friday, March 15, 2013 8:56 AM