Reference Guide

1672 Syslog Commands
Example
The following example limits syslog messages stored in the logging file to
severity level "warning" and above (numerically lower).
console(config)#logging file warning
logging monitor
Use the logging monitor command in Global Config mode to enable logging
messages to telnet and SSH sessions with the default severity level.
Use the no logging monitor command to disable logging messages.
Syntax
logging monitor <severity>
no logging monitor
Parameter Description
Default Configuration
The default severity value is warnings.
Parameter Description
severity-level (Optional) The number or name of the desired severity level.
Range:
[0|emergencies]
[1|alerts]
[2|critical]
[3|errors]
[4|warnings]
[5|notifications]
[6|informational]
[7|debugging]
2CSPC4.X8100-SWUM102.book Page 1672 Friday, March 15, 2013 8:56 AM