Reference Guide

SNMP Commands 1631
Parameter Description
Default Configuration
SNMP authentication, link, multiple-user, spanning-tree, dot1q, mac lock
violation, and ACL traps are enabled by default.
Command Mode
Global Configuration mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the options for the snmp-server enable traps
command.
Parameter Description
acl Enable traps on ACL match events.
all Enable all traps (not recommended).
auto-copy-sw Enable traps on automatic download of switch software.
captive-portal Enable captive-portal traps.
dot1q Enable traps on VLAN configuration failures.
dvmrp Enable dvmrp traps.
maclock Enable traps on MAC locking violations.
ospf Enable OSPF event traps.
ospfv3 Enable OSPFv3 event traps.
pim Enable pim traps (pim-sm and pim-dm).
poe Enable poe traps.
snmp authentication Enable snmp authentication traps.
spanning-tree Enable traps on topology changes.
stack Enable stack firmware synchronization traps.
vrrp Enable vrrp traps.
2CSPC4.X8100-SWUM102.book Page 1631 Friday, March 15, 2013 8:56 AM