Reference Guide

SNMP Commands 1625
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example #1
console#show trapflags
Authentication Flag......................... Disable
Auto-copy-sw Flag........................... Enable
Dot1q Flag.................................. Enable
Link Up/Down Flag........................... Enable
Maclock violation Flag...................... Enable
Multiple Users Flag......................... Enable
Spanning Tree Flag.......................... Enable
VRRP trap................................... Enable
ACL Traps................................... Enable
DVMRP Traps................................. Disable
OSPFv2 Traps................................ Disable
PIM Traps................................... Disable
OSPFv3 Traps................................ Disable
FIP snooping Traps.......................... Enable
Example #2
console#show trapflags ospf
OSPF Traps:
errors:
all..............................Disabled
authentication failure...........Enabled
2CSPC4.X8100-SWUM102.book Page 1625 Friday, March 15, 2013 8:56 AM