Reference Guide

OSPF Commands 1259
Syntax
show ip ospf abr
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command.
Example
console#show ip ospf abr
Type Router Id Cost Area ID Next Hop Next Hop
Intf
----- --------- ----- --------------- --------- --------
INTRA 3.3.3.3 1 0.0.0.1 10.1.23.3 vlan11
INTRA 4.4.4.4 10 0.0.0.1 10.1.24.4 vlan12
show ip ospf area
Use the show ip ospf area command in Privileged EXEC mode to display
information about the identified OSPF area.
Syntax
show ip ospf area area-id
Default Configuration
This command has no default configuration.
Field Description
area-id Identifies the OSPF area whose ranges are being displayed.
(Range: 0–4294967295)
Flood List Length The number of LSAs waiting to be flooded within the area.
2CSPC4.X8100-SWUM102.book Page 1259 Friday, March 15, 2013 8:56 AM