Reference Guide

1118 IPv6 Routing Commands
Syntax
show ipv6 mld groups { group-address | vlan vlan-id }
• group-address — The group address to display.
•
vlan-id — A valid VLAN id.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
The following fields are displayed as a table when vlan vlan-id is specified:
If vlan
vlan-id is not specified, the following fields are displayed for each
multicast group and each interface:
Field Description
Number of (*, G)
entries
Displays the number of groups present in the MLD Table.
Number of (S, G)
entries
Displays the number of include and exclude mode sources
present in the MLD Table.
Group Address The address of the multicast group.
Interface Interface through which the multicast group is reachable.
Uptime Time elapsed in seconds since the multicast group has been
known.
Expiry Time Time left in seconds before the entry is removed from the
MLD membership table.
Field Description
Group Address The address of the multicast group.
Interface Interface through which the multicast group is reachable.
2CSPC4.X8100-SWUM102.book Page 1118 Friday, March 15, 2013 8:56 AM