Reference Guide

IGMP Proxy Commands 1033
Example
The following example resets the host interface status parameters of the
IGMP Proxy router.
console(config)#interface vlan 15
console(config-if-vlan15)#ip igmp-proxy reset-status
ip igmp-proxy unsolicit-rprt-interval
Use the ip igmp-proxy unsolicit-rprt-interval command in Interface
Configuration mode to set the unsolicited report interval for the IGMP Proxy
router. This command is valid only if IGMP Proxy on the interface is enabled.
Syntax
ip igmp-proxy unsolicit-rprt-interval seconds
• seconds — Unsolicited report interval. (Range: 1-260 seconds)
Default Configuration
The default configuration is 1 second.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example sets 10 seconds as the unsolicited report interval for
the IGMP Proxy router.
console(config)#interface vlan 15
console(config-if-vlan15)#ip igmp-proxy unsolicit-rpt-interval 10
2CSPC4.X8100-SWUM102.book Page 1033 Friday, March 15, 2013 8:56 AM