Reference Guide

Command Groups 101
LLDP
add gigabitethernet Adds member gigabit Ethernet port(s) to the
dependency list.
LD
add tengigabitethernet Adds member ten gigabit Ethernet port(s) to
the dependency list.
LD
add port-channel Adds member port-channels to the
dependency list.
LD
depends-on Adds the dependent Ethernet ports or port
channels list.
LD
show link-dependency Shows the link dependencies configured on a
particular group.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
Command Description Mode
a
clear lldp remote-data Deletes all data from the remote data table. PE
clear lldp statistics Resets all LLDP statistics. PE
lldp notification Enables remote data change notifications. IC
lldp notification-interval Limits how frequently remote data change
notifications are sent.
GC
lldp receive Enables the LLDP receive capability. IC
lldp timers Sets the timing parameters for local data
transmission on ports enabled for LLDP.
GC
lldp transmit Enables the LLDP advertise capability. IC
lldp transmit-mgmt Specifies that transmission of the local system
management address information in the
LLDPDUs is included.
IC
lldp transmit-tlv Specifies which optional TLVs in the 802.1AB
basic management set will be transmitted in the
LLDPDUs.
IC
show lldp Displays the current LLDP configuration
summary.
PE
Command Description Mode
a
2CSPC4.X8100-SWUM102.book Page 101 Friday, March 15, 2013 8:56 AM