Reference Guide

Port Channel Commands 623
Command Mode
Interface Configuration (port-channel) mode
User Guidelines
This command has no user guidelines.
show interfaces port-channel
Use the show interfaces port-channel command to show port-channel
information.
Syntax Description
show interfaces port-channel [ port-channel-number ]
Parameter Description
The command displays the following information.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Parameter Description
[
index ] Number of the port channel to show. This parameter is
optional. If the port channel number is not given, all the
channel groups are displayed. (Range: Valid port-channel
number, 1 to 48).
Local Prf An additional field added to support the display of the local
preference.
2CSPC4.X8100-SWUM102.book Page 623 Friday, March 15, 2013 8:56 AM