Reference Guide

Using the CLI 183
Privileged EXEC Use the enable
command to enter
into this mode. This
mode is password
protected.
console#
Use the exit
command, or
press
<Ctrl>+<Z>
to return to the
User EXEC
mode.
Global
Configuration
From Privileged
EXEC mode, use
the configure
command.
console(config)#
Use the exit
command, or
press
<Ctrl>+<Z>
to return to the
Privileged EXEC
mode.
Line Interface From Global
Configuration
mode, use the line
command.
console(config-line)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode.
Management
Access-List
From Global
Configuration
mode, use the
management
access-list
command.
console(config-macal)#
To exit to Global
Configuration
mode, use the
exit command,
or press
<Ctrl>+<Z>
to Privileged
EXEC mode.
Table 2-5. Navigating CLI Command Modes
(continued)
Command Mode Access Method Command Prompt Exit or Access
Previous Mode
2CSPC4.X8100-SWUM102.book Page 183 Friday, March 15, 2013 8:56 AM