Reference Guide

1702 System Management Commands
Example
The following example displays
console(config)#stack
console(config-stack)#set description 1 “unit 1"
slot
Use the slot command to configure a slot in the system. The unit/slot is the
slot identifier of the slot located in the specified unit. The
cardindex is the
index to the database of the supported card types (see the command
show
supported cardtype
) indicating the type of card being preconfigured in the
specified slot. The card index is a 32-bit integer. If a card is currently present
in the slot that is unconfigured, the configured information will be deleted
and the slot will be reconfigured with default information for the card. The
supported card types are:
• PowerConnect 7024
• PowerConnect 7024P
• PowerConnect 7024F
• PowerConnect 7048
• PowerConnect 7048P
• PowerConnect 7048R
• PowerConnect 7048R-RA
•CX4 Expansion Card
• 10GBaseT Expansion Card
•SFP+ Expansion Card
Use the no form of the command to return the unit/slot configuration to the
default value.
Syntax
slot unit/slot cardindex
no slot unit/slot
• unit/slot — The slot identifier of the slot.
2CSPC4.X8100-SWUM102.book Page 1702 Friday, March 15, 2013 8:56 AM