Reference Guide

Command Groups 164
Telnet Server
Terminal Length
stack-port Sets the mode to Stack Global Configuration
mode to configure Stack ports as either
Stacking ports or as Ethernet ports.
GC
standby Configures the standby in the stack. SG
switch renumber Changes the identifier for a switch in the stack. GC
telnet Logs into a host that supports Telnet. PE
traceroute Discovers the IP routes that packets actually
take when travelling to their destinations.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
ip telnet server disable Enables/disables the Telnet service on the
switch.
GC
ip telnet port Configures the Telnet TCP port number on the
switch.
GC
show ip telnet Displays the status of the Telnet server and the
Telnet TCP port number.
PE
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
terminal length Sets the terminal length. PE
Command Description Mode
a
2CSPC4.X8100-SWUM102.book Page 164 Friday, March 15, 2013 8:56 AM