Reference Guide

Captive Portal Commands 1439
user name
Use the user name command to modify the user name for a local captive
portal user.
Syntax
user user-id name name
• user-id —User ID (Range: 1–128).
•
name —user name (Range: 1–32 characters).
Default Configuration
There is no name for a user by default.
Command Mode
Captive Portal Configuration mode.
User Guidelines
There are no user guidelines.
Example
console(config-CP)#user 1 name johnsmith
user password
Use the user password command to create a local user or change the password
for an existing user.
Syntax
user user-id password { password | encrypted enc-password }
• user-id —User ID (Range: 1–128).
•
password —User password (Range: 8–64 characters).
•
enc-password —User password in encrypted form.
2CSPC4.X8100-SWUM102.book Page 1439 Friday, March 15, 2013 8:56 AM