Setup Guide

90 入門指南
Step 4:
Would you like to setup the VLAN1 routing interface
now? [Y/N] y
Please enter the IP address of the device (A.B.C.D) or
enter "DHCP" (without the quotes) to automatically
request an IP address from the network DHCP server:
10.1.1.200
Please enter the IP subnet mask (A.B.C.D or /nn):
255.255.255.0
( 步驟 4：
是否立即設定 VLAN 1 路由介面？ [Y/N] y
請輸入設備的 IP 位址 (A.B.C.D) 或輸入 「DHCP」（不帶引號），自動向
網路 DHCP 伺服器請求 IP 位址： 10.1.1.200
請輸入 IP 子網路遮罩 （A.B.C.D 或 /nn）： 255.255.255.0)
Step 5:
Finally, setup the default gateway. Please enter the
IP address of the gateway from which this network is
reachable. [0.0.0.0]: 10.1.1.1
This is the configuration information that has been
collected:
SNMP Interface = "public"@10.1.2.100
User Account setup = admin
Password = ********
Out-of-band IP address = DHCP
VLAN1 Router Interface IP = 10.1.1.200 255.255.255.0
Default Gateway = 10.1.1.1