Setup Guide

56 使用入门指南
Step 1:
The system is not setup for SNMP management by
default. To manage the switch using SNMP (required for
Dell Network Manager) you can
. Set up the initial SNMP version 2 account now.
. Return later and setup other SNMP accounts. (For
more information on setting up an SNMP version 1 or
3 account, see the user documentation).
Would you like to setup the SNMP management interface
now? [Y/N] y
(
步骤
1
：
默认情况下，系统未设置为使用
SNMP
管理。要使用
SNMP
管理交换机
（
Dell Network Manager
要求），您可以：
.
现在设置初始
SNMP
版本
2
帐户。
.
稍后返回并设置其它
SNMP
帐户。（有关设置
SNMP
版本
1
或
3
帐户的
.
详情，请参阅用户说明文件）。
是否立即设置
SNMP
管理接口？
[Y/N] y)
To setup the SNMP management account you must specify
the management system IP address and the "community
string" or password that the particular management
system uses to access the switch. The wizard
automatically assigns the highest access level
[Privilege Level 15] to this account. You can use Dell
Network Manager or other management interfaces to
change this setting, and to add additional management
system information later. For more information on
adding management systems, see the user documentation.
To add a management station:
Please enter the SNMP community string to be used.
[public]: public