Setup Guide

16 Getting Started Guide

Figure 1-11. Attaching the Brackets

Insert the supplied bolts into the rack-mounting holes and tighten with a

screwdriver.

Repeat the process for the rack-mounting bracket on the other side of the

switch.

Insert the switch into the 48.26 cm (19 inch) rack, ensuring that the rack-

mounting holes on the switch line up to the mounting holes in the rack.

Secure the switch to the rack with either the rack bolts or cage nuts and

cage-nut bolts with washers (depending on the kind of rack you have).

Fasten the bolts on bottom before fastening the bolts on top.

CAUTION: Make sure that the supplied rack bolts fit the pre-threaded holes in the

rack.

NOTE: Make sure that the ventilation holes are not obstructed.