Setup Guide

使用入门指南 55
交换机完成
POST
并引导后，将显示以下对话信息：
Unit 1 - Waiting to select management unit)>
Applying Global configuration, please wait ...
Welcome to Dell Easy Setup Wizard
The Setup Wizard guides you through the initial switch
configuration, and gets you up and running as quickly
as possible. You can skip the setup wizard, and enter
CLI mode to manually configure the switch. You must
respond to the next question to run the setup wizard
within 60 seconds, otherwise the system will continue
with normal operation using the default system
configuration. Note: You can exit the setup wizard at
any point by entering [ctrl+z].
Would you like to run the setup wizard (you must
answer this question within 60 seconds)? [Y/N] y
(
（单元
1 -
正在等待选择管理单元）
>
正在应用全局配置，请稍候
...
欢迎使用
Dell
简易安装向导
该安装向导将指导您完成初始交换机配置，并尽快使您开机并运行。您可
以跳过安装向导，并进入
CLI
模式以手动方式配置交换机。您必须在
60
秒之内答复下一个问题才能运行安装向导，否则系统将使用默认的系统配
置继续正常运行。注：可以随时通过输入
[ctrl+z]
键退出安装向导。
是否要运行安装向导（必须在
60
秒内回答该问题）？
[Y/N] y)