Users Guide

Paso 3:
Next, an IP address is set up. The IP address is defined on the default VLAN (VLAN #1), of which all ports are members. This is the IP address
you use to access the CLI, Web interface, or SNMP interface for the switch. Optionally you may request that the system automatically retrieve
an IP address from the network via DHCP (this require that you have a DHCP server running on the network).
To set up an IP address:
Please enter the IP address of the device (A.B.C.D)or enter "DHCP" (without the quotes) to automatically request an IP address from the network
DHCP server (192.168.2.1):
>> 192.168.2.1<Intro>
Please enter the IP subnet mask (A.B.C.D or /nn){255.255.255.0}:
>> 255.255.255.0<Intro>
Paso 4:
Finally, set up the default gateway. Please enter the IP address of the gateway from which this network is reachable (for example 0.0.0.0): >>
192.168.2.100<Intro>
This is the configuration information that has been collected:
SNMP Interface = "Dell_Network_Manager"@192.168.1.10
User Account set up = admin
Password = **********
Management IP address = 192.168.2.1 255.255.255.0
Default Gateway = 192.168.2.100
Paso 5:
If the information is correct, please select (Y) to save the configuration, and copy to the start-up configuration file. If the information is
incorrect, select (N) to discard configuration and restart the wizard: [Y/N] y
Thank you for using Dell Easy Set up Wizard. You will now enter CLI mode.
Configuraciónavanzada

ConceptosbásicosdelaCLI
El comando helpdelosmodosUserEXECyPrivilegedEXECmuestralosaccesosdirectosdelteclado.Acontinuaciónsemuestralapantalladeejemplodel
comando help:
Console>help
HELP (AYUDA):
Special keys (Teclas especiales):
DEL,BS....deletepreviouscharacter(borrarelcarácteranterior)
Ctrl-A....gotobeginningofline(iralprincipiodelalínea)
Ctrl-E....gotoendofline(iralfinaldelalínea)
Ctrl-F....goforwardonecharacter(avanzaruncarácter)
Ctrl-B....gobackwardonecharacter(retrocederuncarácter)
Ctrl-D....deletecurrentcharacter(borrarelcarácteractual)
Ctrl-U,X..deletetobeginningofline(borrarhastaelprincipiodelalínea)
Ctrl-K....deletetoendofline(borrarhastaelfinaldelalínea)
NOTA: silaprimeraylasegundaentradadecontraseñanocoinciden,sesolicitaráalusuarioquevuelvaaespecificarlashastaquecoincidan.
NOTA: sihaseleccionadoDHCPanteriormente,elsistemanosolicitarálamáscaradesubredIP,yaqueelservidorDHCPproporcionaestainformación.
NOTA: sihaseleccionadoDHCPanteriormente,elsistemanosolicitaráunapuertadeenlacepredeterminada,yaqueelservidorDHCPproporcionaesta
información.