Reference Guide

742 Quality of Service (QoS) Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\QoS.fm
DELL CONFIDENTIAL – PRELIMINARY 10/21/13 - FOR PROOF ONLY
Weighted Random Tail Drop will be enabled after reset
show qos interface
Use the show qos interface EXEC mode command to display Quality of
Service (QoS) information on the interface.
Syntax
show qos interface [buffers | queueing | policers | shapers | rate-limit]
[interface-id]
Parameters
• buffers —Displays the buffer settings for the interface's queues. For GE
ports, displays the queue depth for each of the 8 queues. For FE ports,
displays the minimum reserved setting.
•
queueing —Displays the queue's strategy (WRR or EF), the weight for
WRR queues, the CoS to queue map and the EF priority.
•
policers —Displays all the policers configured for this interface, their
settings, and the number of policers currently unused.
•
shapers —Displays the shaper of the specified interface and the shaper for
the queue on the specified interface.
•
rate-limit —Displays the rate-limit configuration.
•
interface-id —Specifies an interface ID. The interface ID can be one of the
following types: Ethernet port, or Port-channel.
Default Configuration
There is no default configuration for this command.
Command Mode
EXEC mode
User Guidelines
The policers option is relevant for a VLAN interface only.
If no parameter is specified with the show qos interface command, the port
QoS mode (DSCP trusted, CoS trusted, untrusted, and so on), default CoS