Reference Guide

710
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\ACL.fm
DELL CONFIDENTIAL – PRELIMINARY 2013 - FOR PROOF ONLY
time-range
Use the time-range global configuration mode command to enable Time-
Range Configuration mode and define time ranges for functions (such as
access lists). Use the no form of this command To remove the time range
configuration.
Syntax
time-range time-range-name
no time-range time-range-name
Parameters
time-range-name—Specifies the name for the time range. (Range: 1–32
characters)
Default
No time range is defined
Command Mode
Global Configuration mode
User Guidelines
After the time-range command, use the periodic time-range configuration
command and the absolute time-range configuration command. Multiple
periodic commands are allowed in a time range. Only one absolute command
is allowed.
If a time-range command has both absolute and periodic values specified, the
periodic items are evaluated only after the absolute start time is reached, and
are not further evaluated after the absolute end time is reached.
All time specifications are interpreted as local time.
To ensure that the time range entries take effect at the desired times, the
software clock should be set by the user or by SNTP. If the software clock is
not set by the user or by SNTP, time range ACEs are not activated.
The user cannot delete a time-range that is bounded to an ACE or to any
other feature.