Reference Guide

696
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\ACL.fm
DELL CONFIDENTIAL – PRELIMINARY 2013 - FOR PROOF ONLY
• dscp number —Specifies the DSCP value.
• precedence number —Specifies the IP precedence value.
• icmp-type —Specifies an ICMP message type for filtering ICMP packets.
Enter a number or one of the following values: echo-reply, destination-
unreachable, source-quench, redirect, alternate-host-address, echo-
request, router-advertisement, router-solicitation, time-exceeded,
parameter-problem, timestamp, timestamp-reply, information-request,
information-reply, address-mask-request, address-mask-reply, traceroute,
datagram-conversion-error, mobile-host-redirect, mobile-registration-
request, mobile-registration-reply, domain-name-request, domain-name-
reply, skip, photuris. (Range: 0–255)
• icmp-code —Specifies an ICMP message code for filtering ICMP packets.
(Range: 0–255)
• igmp-type —IGMP packets can be filtered by IGMP message type. Enter a
number or one of the following values: host-query, host-report, dvmrp,
pim, cisco-trace, host-report-v2, host-leave-v2, host-report-v3. (Range:
0–255)
• destination-port —Specifies the UDP/TCP destination port. You can
enter range of ports by using hyphen. E.g. 20 - 21. For TCP enter a number
or one of the following values: bgp (179), chargen (19), daytime (13),
discard (9), domain (53), drip (3949), echo (7), finger (79), ftp (21), ftp-
data (20), gopher (70), hostname (42), irc (194), klogin (543), kshell (544),
lpd (515), nntp (119), pop2 (109), pop3 (110), smtp (25), sunrpc (1110,
syslog (514), tacacs-ds (49), talk (517), telnet (23), time (37), uucp (117),
whois (43), www (80). For UDP enter a number or one of the following
values: biff (512), bootpc (68), bootps (67), discard (9), dnsix (90), domain
(53), echo (7 ), mobile-ip (434), nameserver (42), netbios-dgm (138),
netbios-ns (137), non500-isakmp (4500), ntp (123), rip (520), snmp 161),
snmptrap (162), sunrpc (111), syslog (514), tacacs-ds (49), talk (517), tftp
(69), time (37), who (513), xdmcp (177). (Range: 0–65535)
• source-port —Specifies the UDP/TCP source port. Predefined port names
are defined in the destination-port parameter. (Range: 0–65535)