Reference Guide

474 Spanning-Tree Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\Spanning-Tree.fm
DELL CONFIDENTIAL – PRELIMINARY 10/21/13 - FOR PROOF ONLY
abort (MST)
Use the abort MST Configuration mode command to exit the MST
Configuration mode without applying the configuration changes.
Syntax
abort
Command Mode
MST Configuration mode
Example
The following example exits the MST Configuration mode without saving
changes.
Console(config)# spanning-tree mst configuration
Console(config-mst)# abort
show spanning-tree
Use the show spanning-tree Privileged EXEC mode command to display the
spanning-tree configuration.
Syntax
show spanning-tree [ interface-id ] [instance instance-id | detailed]
show spanning-tree [detail] [active
| blockedports] [instance instance-id ]
show spanning-tree mst-configuration
Parameters
• instance instance-id —Specifies the spanning tree instance ID. (Range:
0–
15)
• detail —Displays detailed information.
•
active —Displays active ports only.
•
blockedports —Displays blocked ports only.