Reference Guide

LLDP Commands 449
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\LLDP.fm
DELL CONFIDENTIAL – PRELIMINARY 10/21/13 - FOR PROOF ONLY
show lldp statistics
Use the show lldp statistics EXEC mode command to display the Link Layer
Discovery Protocol (LLDP) statistics.
Syntax
show lldp statistics [ interface-id | detailed]
Parameters
• interface-id —Specifies an interface ID. The interface ID must be an
Ethernet port.
•
detailed —Displays information for non-present ports in addition to
present ports.
Default Configuration
Display is for present ports.
Command Mode
EXEC mode
Example
The following example displays LLDP statistics for all present ports
Switch# show lldp statistics
Contax(config-if)# do show lldp statistics
Tables Last Change Time: 14-Oct-2010 32:08:18
Tables Inserts: 26
Tab l e s Delet e s : 2
Power value The total power in watts required by a PD device from
a PSE device, or the total power a PSE device is
capable of sourcing over a maximum length cable
based on its current configuration.
LLDP MED - Location
Coordinates, Civic
address, ECS ELIN.
The location information raw data.