Reference Guide

LLDP Commands 437
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\LLDP.fm
DELL CONFIDENTIAL – PRELIMINARY 10/21/13 - FOR PROOF ONLY
Command Mode
Interface Configuration (Ethernet) mode
Example
The following example configures the LLDP MED location information on
gigabitethernet port
1/0/ 2 as a civic address.
console(config)# interface gi1/0/2
console(config-if)#
lldp med location civic-address 616263646566
show lldp configuration
Use the show lldp configuration Privileged EXEC mode command to display
the Link Layer Discovery Protocol (LLDP) configuration for all interfaces or
for a specific interface.
Syntax
show lldp configuration [i nterface-id | detailed]
Parameters
• interface-id —Specifies an interface ID. The interface ID must be an
Ethernet port.
•
detailed —Displays information for non-present ports in addition to
present ports.
Default Configuration
Display is for present ports.
Command Mode
Privileged EXEC mode
Example
The following example displays LLDP configuration for all present ports.
Switch# show lldp configuration
State: Enabled