Reference Guide

432 LLDP Commands
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\LLDP.fm
DELL CONFIDENTIAL – PRELIMINARY 10/21/13 - FOR PROOF ONLY
Console(config)# interface gi1/0/ 3
Console(config)# lldp med enable location
lldp med notifications topology-change
Use the lldp med notifications topology-change Interface Configuration
(Ethernet) mode command to enable sending LLDP MED topology change
notifications. Use the no form of this command to restore the default
configuration.
Syntax
lldp med notifications topology-change {enable | disable}
no lldp med notifications topology-change
Parameters
• enable —Enables sending LLDP MED topology change notifications.
•
disable —Disables sending LLDP MED topology change notifications.
Default Configuration
Disable is the default.
Command Mode
Interface Configuration (Ethernet) mode
Example
The following example enables sending LLDP MED topology change
notifications on gigabitethernet port
1/0/ 2.
Console(config)# interface gi1/0/ 2
Console(config)# lldp med notifications topology-change enable